A) To transform radiation entering through windows and doors, Penta Power Quatro Tags are placed.
Find out where and how here.
General rule: the Quatro Tag consists of 4 equal Tags with diameter of 19 mm which are always stuck together in the same plane.
a) If you have one window, glue each of the four Tags on the inside of the plastic, aluminum, wood or steel window profile at the four corners. If the profiles are too narrow for the Tags, you can attach them on the wall next to the window profile in the corners. See image below:
(b) Are there multiple windows side by side, separated by window profiles? Then glue each of the four Tags on the inside of the window profile at the corners. See image below:
c) If there are several windows next to each other separated by a narrow piece of wall, stick the four Tags on the wall at the level of the extreme corners of the windows. See image below:
The maximum range or operating area of a set of Penta Power Quatro Tags is 6 meters by 2.5 meters. Specifically, the Tags neutralize and transform radiation in this area.
If the area to be treated is larger, use multiple sets of Quatro Tags. For example, is your wall 7 meters wide by 2 meters high? Then use 2 sets of Quatro Tag as indicated in the image below:
In this way, you ensure that the entire surface is treated and all radiation is transformed.
B) Home Tags to transform radiation entering the home from outside
Would you like to find out how many Home Tags you need to protect your home?
Based on photos, our experts carry out a detailed risk analysis, taking into account the specific characteristics of your home and surroundings. This determines the correct locations for attaching the right number of Tags. You will be assured of maximum radiation protection.
C) Place an additional Penta Power Gold Tag in any room where the high-voltage line or overhead line of train or streetcar is visible
Want to know more about a high-voltage power line or train or streetcar overhead line as a radiation source? Click here.
