Cordless landline telephones (“DECT phones”): guide to placement and use of Penta Power Tags

To neutralize radiation from a DECT phone, there are a minimum of 2 sets of Penta Power Duo Tags are required:

1. Stick a set of Penta Power Duo Tags on the wireless handset
2. Attach a set of Penta Power Duo Tags to the charger

A set of Penta Power Duo Tags consists of 2 tags stuck together on the same side of the cordless phone.

Penta Power always wants to offer its customers the best quality.

Therefore, it is important to Thoroughly clean the surfaces that the Penta Power Duo Tags will be placed on before application. . This is how you ensure optimal adhesion and proper functioning of the Tags.

Manual:

1. Take a cloth and wet it with alcohol.
2. Clean the surfaces where the Tags will go with the cloth.
3. Pat them dry with kitchen paper.
4. Stick the Penta Power Duo Tags on your device.
5. Press them firmly for a few seconds.

Learn more about a cordless phone (“DECT Phone”) as a source of radiation? Click here.